Chain conveyors from 25 to 2500 t/h

ROMAX company manufactures chain conveyors, type K for horizontal transportation of bulk materials.

It is used in agriculture, chemical industry and enterprises of mineral products processing.

The main products are grain (bread and seed grain), oilseeds and leguminous crops. Also, these conveyors are suitable for any product in the form of granules.
The equipment nominal capacity from 25 to 2500 t/h is calculated for wheat, with bulk density 0.75 t/m3 ,  by humidity
18%, and content of impurities - up to 5% under normal environmental conditions.

The maximum of the chain conveyor slope is 7°. The equipment is provided with an overflow sensor and a speed sensor.

состав скребк. трансп..jpg

Component parts:

1. Drive section;
2.  Overflow switch;
3.  Outlet hopper;
4.  Motor bracket;
5.  Gear motor;
6.  Cover plate;
7.  Side plates;
8.  Connecting plate;
9.  Edge connection;
10.  Extension section;
11.  Tension section;
12.  Guide profile;
13.  Tension bracket;
14.  Tension stud-bolt;
  

15.  End plate;
16.  Discharge hopper of the gate valve
       (optional);
17.  Gate of additional discharge
       (optional);
18.  Chain;
19.  Bottom with polymer plate;
20.  Cleaning brush;
21.  Scraper  (fig. 1);
22.  Cleaning bucket  (fig. 2);
23.  Cleaning plate  (fig. 3);
24.  Inspection window (optional);
25.  Chain carrying support return roller  (fig. 4);
26.  Return roller axis.

 Types of chain units

scraper chain elements.jpg

Drive section

голова скребка.jpg

The gear motors, manufactured by Bonfiglioli and Nord, providing reliable and long-term equipment operation are installed to conveying equipment.
In its standard version the unit is made of galvanized steel. We have experience in manufacturing of the units of stainless steel.
Included: overflow sensor of the drive section, outlet hopper, bearing assemblies SKF and KG.

Extension section

удлиннеие скребка.jpg

Fast and efficient assembling is performed using bolted joints.
It is made of galvanized or stainless (optionally) steel with 2-3 mm thick sheets.
The bottom is lined with 10 mm thick polymer plates to provide long-term operation period of the conveyor and reduce the noise.
Chain carrying support rollers are made of special polymer or steel.
Conveyors with a capacity more than 150 t/h have support bearings mounted on rollers axes.

Tension section

натяжка скребка.jpg

Is used for chain tension.
It has a simple, reliable and safe design.
Drive sprocket bolts are thermally hardened and made of special sorts of steel.
The tension is performed by tightening of the studbolt.

Redler gate

задвижка скребка.jpg

Various versions of design - with manual drive and electrical drive.
Completed with a discharge hopper.
To prevent chain slack over discharge, an opening support structure "dovetail" is used.

Conveyor with a side inlet

бок засыпка скребка.jpg

Is used as an intake unit.
It is easy and fast to assemble.
Galvanized bolted construction.
It is completed with an intake hopper with splitter dampers. 

Technical description

TYPE A B C D E H h I J K L M Capacity,
t/h
К40 350 ∅50 ∅30 230 296 325 310 ∅200 330 250 230 700 up to 25–50
К60 350 ∅50 ∅30 230 296 345 310 ∅200 330 250 230 700 up to 60
К100 420 ∅70 ∅50 330 396 418 408 ∅250 330 250 319 1200 up to 80–120
К150 500 ∅75 ∅60 390 470 545 520 ∅300 480 370 420 1200 up to 150–175
К200 520 ∅90 ∅75 430 510 617 590 ∅300 480 300 475 1200 up to 200–250
К300 625 ∅100 ∅75 560 640 665 650 ∅350 560 285 480 1200 up to 300–350
cepnoj_transporter_1
cepnoj_transporter_2
3
6
img_2259
img_2328

  

Go back