Drag conveyors from 25 to 2500 t/h
Drag conveyors manufactured by ROMAX are used for horizontal and inclined transportation of bulk materials. The angles of elevation of the inclined conveyor are 15° and 30°.
The capacity of the drag chain conveyor is from 25 to t/h. It is designed and manufactured in industrial version to provide reliability and long-term operation period.
Component parts:1. Drive section;
3. Outlet hopper;
4. Motor bracket;
5. Gear motor;
6. Tension section
7. Guide profile;
8. Tension bracket;
9. Fixed bracket;
10. Tension stud-bolt;
11. Conveyor horizontal section;
12. Conveyor slope section;
13. Connecting plate;
14. Conveyor slope section
(angle of 15° and 30° degrees);
15. Gate of additional
16. Chain with scrapers (fig. 1);
17. Guide profile.
The use of polymer scrapers can increase reliability and long-term operation period of drag conveyors.
The scraper design can significantly reduce grain damage.
Chain intake conveyors (Type KZ)
Chain intake conveyors (Type KZ) are made of galvanized steel. They are used for grain seeds intake from auto transport facilities.
Intake conveyors are used for horizontal transportation of bulk materials in industry and agriculture, mainly for grain, legume and oil-producing crops.
|KS40||350||∅50||∅30||230||296||365||350||∅200||780||250||1030||700||up to 40|
|KS60||350||∅50||∅30||230||296||450||435||∅200||860||300||1230||700||up to 60|
|KS100||420||∅70||∅50||330||396||500||480||∅250||940||300||1430||1200||up to 100|
|KS150||500||∅75||∅60||390||470||595||570||∅300||1020||370||1630||1200||up to 150|