Inclined chain conveyor
The inclined chain conveyor manufactured by the ROMAX plant is used in various branches of agricultural business. The main task of this equipment is to transport bulk materials to the place of their storage or processing. These can be cereals, leguminous and oilseed crops.
Conveyors of this type are used in almost every grain processing and storage complex or farm. Therefore, you need to immediately equip your farm with
The nominal capacity of the equipment from 25 to 1000 t/h is calculated for wheat, with bulk density 0,75 t/m³, humidity level of 18% and content of impurities — up to 5%, under normal environmental conditions.
Conveyor component parts:
- Drive section;
- Overflow switch;
- Outlet hopper;
- Gear motor;
- Cover plate;
- Side plates;
- Connecting plates;
- Side connections;
- Extension (intermediate) sections;
- Tension (tail) section;
- Guide profile;
- Tension bracket;
- End plate;
- Discharge hopper of the gate valve (optional);
- Additional discharge shutter (optional);
- Bottom with polymer plate;
- Cleaning brush;
- Scraper (fig. 1);
- Cleaning bucket (fig. 2);
- Cleaning plate (fig. 3);
- Inspection window (optional);
- Idler return;
- Return roller axis.
All main elements of the chain conveyor are made of galvanized steel sheet, the mass of which is not less than 275 grams per square meter. The auxiliary elements are made of profiled structural steel.
The bottom of the extension section is lined with polymer plates. The thickness of each plate is 10 millimeters. They not only perform a protective function, but also significantly increase the service life of the unit.
The tension section is safe and reliable. The tension of the section is carried out by screw pairs. All sections are equipped with an inductive speed sensor. The tension disc is made of structural steel.
The redler gate valve is equipped with a protective grid, which is located above the outlet and serves to prevent chain breakage. Supplied with an electric drive, optionally it can be equipped with a manual drive.
The conveyor with a grain intake section can be used both
Chain conveyors are equipped with polymer scrapers, thereby increasing the service life of the equipment. The scraper allows to reduce damage of the grain, which affects the quality of the product.
The conveying equipment manufactured at our plant is completed with the
Our plant manufactures conveying equipment made of galvanized and stainless steel. The accumulated experience, mechanized assembly process and the absence of a human factor make our product durable and reliable.
Included: SKF and KG bearing units, overflow safety device of the drive section, discharge hopper.
All models of chain conveyors manufactured at ROMAX plant are bolted, which significantly reduces the time of the conveyor manufacture.
You may be interested in: